• AFM4211 All-Flex Mowers

AFM4211 All-Flex Mowers

AFM4211 All-Flex Mowers

Available Models



The AFM4211 All-Flex Mower provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as fairways, parks, schoolyards, sports fields, and small estates. The AFM4211 is available with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport from one mowing site to another the hydraulic wing cylinders will easily lift the wing decks for a 7’-8" transport width. The contour following capability, highly productive 11’ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph.

Download Features and Benefits

Download features and benefits of this product here:  315-507f.pdf

Download Specifications

Download the Product Specifications here:  315-507s.pdf


Gearbox: 5 years Parts & Labor
Cylinders: 1 year parts and labor
Hoses and seals: Considered wear items
Belts, blades, friction discs in slip-clutch and tires: Considered wear items

Warranty PDF

Download the warranty here: 315-507w.pdf

Frequently Asked Questions About This Product

Why is there vibration and profile wearing on the telescoping driveline?

Driveline profiles need to be lubricated. A thin coat of wheel bearing grease should be applied to the inner tubes of the drivelines at a minimum period of every 50 hours.

Why is my cutting height different on one deck compared to the others?

If you have made deck height adjustments to raise or lower the cutting height, make sure that you have the same number of spacers on all 10 gauge wheels.

What is the cause of driveline damage on the All-Flex Mowers?

The most common failure on any AFM driveline is lack of grease on the profiles. Over angling can also result in cross failure on the CV driveline.

What is included in the Mulch Mower Blade Kit?

Three CW and Six CCW Blades 

What causes the blades to wear?

Sand or dirt is the most common issue with the blades. When high lift blades are used, they have higher wear, and create a sand blasting effect on the blades and deck.

What caused the spindle hub to break on my All-Flex Mower?

The most common reason for hubs to break is impact with foreign objects or the ground. Impact damage will blow out the back of the bearing housing.

What are the blade options for my mower?
  • Medium Lift blade - medium suction for lifting grass, requires less HP than the high lift. (Standard on AFM4211 and AFM4522)
  • Low Lift - recommended for sandy soils for less soil disturbance and longer blade life. (Standard on AFM4214 and AFM4216)
  • High Lift - heavy suction for lifting grass, requires higher HP in tall dense grass and is not recommended so sandy soils
  • Mulching - Perfect for leaf mulching
How sharp can I turn with my AFM42?

With the rear wheels locked in line with the transport wheels, the AFM42 lets you do a 180 degree turn.

How sharp can I turn with my AFM with a CV Driveline?

The CV Joint allows the driveline to run at angles up to 80 degrees left or right. When turns are made with angles greater than 80 degrees this can cause vibration and ultimately damage to the driveline. Over angling the driveline will cause the CV joint to break.

How big of a tractor do I need to run the AFM42 Series?

The Operator’s Manual (which can be found on Related Products Page below) recommends a 30-70 HP tractor because Land Pride is looking at the mower being used in all conditions.

Product Video


Download product literature here:  lit_afm4211.pdf

Co-Op Advertising