The RB35 Series Rear Blades are ideal for landscaping, construction, snow removal, feedlot cleaning and all-around farm use. A retractable parking stand is included to assist in blade removal, storage, and remount capabilities. Available accessories include a single gauge wheel for depth control, end plates for holding material, and skid shoes for blade protection. The moldboard can be removed to accommodate installation of a landscape rake. Hydraulic cylinders can be added to control the gauge wheel and blade offset (two cylinders are required).
Features and Benefits
|Cat. 1 & 2 Hitch||Fits wide variety of tractors.|
|Blade angles left and right up to 60 degrees in either direction||(9 Forward positions in 15 degree increments and 5 reverse positions in 30 degree increments) Many angles for diverse jobs and results.|
|Blade offsets left or right 12”||(7 positions: Center, 3 left and 3 right) Helps extend blade past tractor tire.|
|Blade tilts up and down up to 30 degrees||(5 positions: Center, 2 clockwise and 2 counterclockwise) Allows operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches.|
|Heavy turntable housing (dog house)||Keeps all parts fitting snug to eliminate premature wear. Extends life on threaded shaft.|
|17 1/2” High rolled moldboard||Rolls material for less drag.|
|5/16” Moldboard thickness||Offers thickness for rugged work.|
|2” x 2 x 3/8” Angle iron reinforcement on 84” & 96” Moldboards||Gives 84” & 96” moldboard added strength.|
|1/2 ” x 6” Heat-treated reversible cutting edge||Gives twice the life from the cutting edge by being able to reverse it.|
|Retractable Parking Stand||Keeps frame off ground during storage, also allows for easy hook-up.|
|Landscape Rake adaptable||Landscape Rake can be added.|
|End plates (optional)||End plates allow the blade to hold dirt in to move it.|
|Skid shoes (optional)||Set depth of blade to clear obstructions such as manhole covers or street cracks.|
|Gauge wheel (optional)||Can be used for more precise grading by keeping the moldboard at a fixed position.|
Overall Unit: One year Parts and Labor
Hydraulic Cylinder: One year Parts and Labor.
Hoses and seals: Considered wear items.
Cutting Edges: Considered wear items