AFM4214 All-Flex Mowers

AFM4214 All-Flex Mowers

Features

Note: Some feature photos may be represented by a similar model and not the specific model shown on this page.

Gearbox Warranty

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

Transport Tires

23" Large transport tires offer smooth roading and less grass compaction.

Optional Hydraulic Wing Unlock

Transport locks can be released easily from the tractor seat while operating the same tractor control lever that raises and lowers the mower decks. (Pull-rope release standard.)

Zero Turn Radius

Sleek frame design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.

Over Center Release

Over center release easily takes tension off the drive belts during extended off time, or for belt replacement.

Low Deck Pivot

Low deck pivot allows for greater side to side flotation on the wing decks.

Anti-Scalp Rollers

Anti-scalp rollers on nose and trailing edges of decks protect the deck as well as the turf.

Features and Benefits PDF

Product Specs

Download Product Specifications PDF:

Warranty Information

Overall Unit and Driveline: One year Parts and Labor.
Gearbox: 5 years on Parts and Labor.
Hydraulic Cylinder: One year Parts and Labor. Hoses and seals are considered wear items.
Belts, Blades & Friction Discs in Slip-Clutches: Considered wear items.
Tires: Considered wear items.

Download Warranty PDF:

Product Manuals

Operator
Parts
Accessory

Service FAQs

Frequently Asked Questions About This Product

Why is there vibration and profile wearing on the telescoping driveline?
Answer

Driveline profiles need to be lubricated. A thin coat of wheel bearing grease should be applied to the inner tubes of the drivelines at a minimum period of every 50 hours.

Why is my cutting height different on one deck compared to the others?
Answer

If you have made deck height adjustments to raise or lower the cutting height, make sure that you have the same number of spacers on all 10 gauge wheels.

What is the cause of driveline damage on the All-Flex Mowers?
Answer

The most common failure on any AFM driveline is lack of grease on the profiles. Over angling can also result in cross failure on the CV driveline.

What is included in the Mulch Mower Blade Kit?
Answer

Three CW and Six CCW Blades 

What causes the blades to wear?
Answer

Sand or dirt is the most common issue with the blades. When high lift blades are used, they have higher wear, and create a sand blasting effect on the blades and deck.

What caused the spindle hub to break on my All-Flex Mower?
Answer

The most common reason for hubs to break is impact with foreign objects or the ground. Impact damage will blow out the back of the bearing housing.

What are the blade options for my mower?
Answer
  • Medium Lift blade - medium suction for lifting grass, requires less HP than the high lift. (Standard on AFM4211 and AFM4522)
  • Low Lift - recommended for sandy soils for less soil disturbance and longer blade life. (Standard on AFM4214 and AFM4216)
  • High Lift - heavy suction for lifting grass, requires higher HP in tall dense grass and is not recommended so sandy soils
  • Mulching - Perfect for leaf mulching
How sharp can I turn with my AFM42?
Answer

With the rear wheels locked in line with the transport wheels, the AFM42 lets you do a 180 degree turn.

How sharp can I turn with my AFM with a CV Driveline?
Answer

The CV Joint allows the driveline to run at angles up to 80 degrees left or right. When turns are made with angles greater than 80 degrees this can cause vibration and ultimately damage to the driveline. Over angling the driveline will cause the CV joint to break.

How big of a tractor do I need to run the AFM42 Series?
Answer

The Operator’s Manual (which can be found on Related Products Page below) recommends a 30-70 HP tractor because Land Pride is looking at the mower being used in all conditions.

Product Literature

Download product literature:

Co-Op Advertising