• SC26 Series Skid Steer Cutters

SC26 Series Skid Steer Cutters - DISCONTINUED

SC26 Series Skid Steer Cutters

Available Models

SC2660, SC2672


The Land Pride SC26 Series Skid Steer Rotary Cutter has an eye-pleasing, smooth-top design for easy maintenance and clean running. Attachment is made quick and easy with the standard universal skid steer floating-hitch mounting plate. The float capability also makes operation very user friendly over uneven ground. An integral hydraulic relief valve is also standard equipment to protect the motor and hydraulic system against overloading. The skid steer must be equipped with a case drain system for proper operation.

If your skid steer is not equipped with an Operating Protective Door Shield, one can be obtained from Land Pride.

Features and Benefits

Surpassed Rugged Industry Standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
Low Volume Motor @ 11-16 gpm Medium Volume Motor @ 17-21 gpm High Volume Motor @ 22-27 gpm Customer can chose one of three optional motors for his SC2660 cutter or one of two optional motors (medium and high volume) for his SC2672 cutter. This allows the cutter to fit a wide variety of Skid Steers. Also the deck can be upgraded to a different motor when owner upgrades his Skid Steer.
Two Year Gearbox & Motor Warranty Shows Land Pride’s confidence in the gearbox and motor.
Case Drain Protects gearbox.
Smooth Top 14 GA Deck with 10 GA. Bottom Deck No pockets to collect rain and dirt. Easy to clean. Superior double deck construction
1/4” Side Panels for Overall Reinforcement Protects sides from debris being thrown against them from the blades.
Side Discharge Allows material to be discharged away from operator.
Front and Rear Chain Shields Single chain on the front and double chain on the rear. Reduces flying debris.
(Optional) Replaceable Skid Shoes Protect side plate structure. Shoes are replaceable for convenience.
Splined Blade Bar Allows for tight positive fit of stump jumper and blade bar to motor output shaft.
3/16” Round Stump Jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1/2” x 4” Heat-treated Free Swinging Blades Heat-treated blades offer longer life. Free swinging blades protect from obstructions.
2” Diameter Cutting Capacity Can aid in clearing brush.
SC2660 High Blade Tip Speed Low volume motor = 18,540 fpm at 16 gpm. Medium volume motor = 18,850 fpm at 21 gpm. High volume motor = 19,000 fpm at 27 gpm.
SC2672 High Blade Tip Speed Medium volume motor = 17,200 fpm at 21 gpm. High volume motor = 18,550 fpm at 27 gpm.
Offset Hitch (8 1/2" to the right) Allows the operator to cut close to obstacles on the right side.
Optional Front Gauge Wheel Provides easy operation and handling over uneven terrain, laminated tire can’t go flat.
Floating Hitch Mounting Plate Allows smoother travel over rough terrain with the optional gauge wheel easing the fatigue put on the operator.
Optional Operator Protection Door Provides additional operator protection from flying objects.
Lift Limit Safety Chain Provides additional operator protection from flying objects by allowing the Rotary Cutter to only be lifted up to 18".


Download Features and Benefits

Download features and benefits of this product here:  326-025f.pdf

Download Specifications

Download the Product Specifications here:  326-025s.pdf


Overall Unit: One year Parts and Labor
Gearbox & Motor: Two years Parts and Labor.
Hoses and Seals: Considered wear items.
Blades and Tires: Considered wear items.

Warranty PDF

Download the warranty here: 326-025w.pdf

Frequently Asked Questions About This Product

Which motor (low, med, high) do I need to order for my power unit?

First, you will need to know the flow gpm of your power unit. Once you know this, refer to the Operator’s Manual for the motor requirements (manual can be found on Related Products Page below).

What material can I cut and what size?

Any organic material grass, wood and up to 2” diameter material.

What is the chain at the hitch for?

This is a check chain. It is designed to hook to the power unit to keep the mower height 18” and under from the ground height.

What is the blade tip speed?

It varies with the gpm and pressure of the power unit and which one of the three motors that is on the unit. There is a charge located in the specifications page in the Operator’s Manual (manual can be found on Related Products Page below).

Do I have to use the third line and what’s the purpose of the line?

Yes, it is recommended that the case drain line be used. If it is not, you run the risk of blowing an output seal as the spike pressures during shut down are too great. The purpose of this line is a case drain. It relieves pressure from the case of the motor when they become greater than the seals can hold.

Product Video


Download product literature here:  lit_sc.pdf