• RCR35 Series Rotary Cutters

RCR35 Series Rotary Cutters (Discontinued)

RCR35 Series Rotary Cutters

Available Models

RCR3596, RCRM3596, RCR3510, RCRM3510


The medium-duty Land Pride RCR35 Series Rotary Cutter provides excellent cutting performance on gently sloping or slightly contoured rights-of way, pastures, set-aside acres, or row crop fields. Their 8' or 10' cutting width, 2" to 12" cutting height and ability to cut weeds and brush up to 2" in diameter make them well suited for a variety of applications. Both models offer Quick-Hitch adaptability with either 540 RPM or 1000 RPM PTO capability.

The RCR3596 Cutter Series is designed for category 1 or 2, three point, semimount, or pull-type attachment. Three-point attachment for the RCR3596 requires a 50-120 HP tractor, while the semi-mount or pull-type requires a 30-120 HP tractor. The RCR3510 Series is designed for category 2 or 3 three point, semi-mount, or pull type attachment with the lift type requiring 60-120 HP input and the pull-type or semi-mount requiring 50-120 HP input. Heavy-duty stump jumpers, main driveline clutches, and outboard flex couplers are offered for driveline and gearbox protection. Safety guards around the cutter are offered in either chain or rubber.

Features and Benefits

Surpassed rugged industry standards All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
540 or 1000 RPM Fits wider variety of tractors.
Gearbox HP rating 120 HP on center unit and 100 HP on outboard units.
5 Yr. limited gearbox warranty Shows our confidence in the gearbox integrity.
3 Gearboxes Allows equal torque to be spread to left and right gearbox.
Splined rubber flex-couplers between the center and outboard gearboxes Protects the driveline and gearboxes from hard objects in the blade path.
Pull-type unit Constant velocity driveline U-Joint option (RCR3510 only) Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection on main driveline Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
8’- Cat. 1 & 2 or 10’- Cat. 2 & 3 -Point & Semi-mount Hitches r Pull-type Hitch its a wide range of tractors. emi-mount and Pull-type fit older tractors without a top link and smaller tractors without nough lift capacity.
10 Gauge deck, fully welded Fully welded deck adds rigidity.
1/4” Thick sidewalls Protects sidewalls from thrown objects.
Obstacle free underside Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
Pull-type w/dual leveling rods Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber guard option Reduces flying debris.
Full length skids with replaceable shoes Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
Splined blade hub Splined blade hub offers tight non-slipping attachment to output shaft.
3/16” Round stump jumper Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1” x 4” Blade bar Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2” x 4” Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
2” Diameter cutting capacity Aids in cutting brush.
High blade tip speed Means cleaner cutting. 96” at 540 rpm - 14,223 fpm; at 1000 rpm - 14,442 fpm 10’ at 540 rpm - 17,291 fpm; at 1000 rpm - 17,569 fpm
Laminated tires on 3-Point and Semi-Mount Laminated tires can handle almost any condition.
Airplane tires or Laminated tires on Pull-Type Airplane tires offer smooth roadability. Laminated tires don’t go flat.
Quick-Hitch adaptable 3-point and semi-mount are Quick-hitch adaptable.


Download Features and Benefits

Download features and benefits of this product here:  312-517f.pdf

Download Specifications

Download the Product Specifications here:  312-517s.pdf


Overall Unit and Drivelines: One year Parts and Labor
(S/N 375614+) Five years on Parts and Labor.
(S/N 375613-) One year on Parts and Labor.
Hydraulic Cylinder: One year Parts and Labor
Hoses and seals: Considered wear items
Blades, Tires, and Driveline Friction Discs: Considered wear items.

Warranty PDF

Download the warranty here: 312-517w.pdf

Product Video


Download product literature here:  lit_rcr35.pdf