2WD: 65-100 HP; 4WD: Up to 75 HP
Land Pride's RBT40 Series 3-Way Hydraulic Rear Blades are built tough from the ground up for applications ranging from landscaping, construction, snow removal, and feedlot cleaning. Designed to handle 100 HP tractors, this blade is also ideal for ditching, road grading and all-around farm use. By using hydraulics at all three positions, time can be utilized more efficiently by making changes on the go. Optional skid shoes and side plates are available for more precise results.
Land Pride's RBT45 Series 3-Way Hydraulic Rear Blades are ideal for landscaping, construction, snow removal, feedlot cleaning, and all-around farm use. Make changes on the go with hydraulics at all three positions and use your time more efficiently. Available options include single or double hydraulic gauge wheels, side plates for holding dirt in, and skid shoes for blade protection.
Land Pride's RBT55 Series 3-Way Hydraulic Rear Blade are built tough from the ground up. Make manual or hydraulic adjustments; angle, tilt, or offset to meet the demands of heavy-duty jobs. The blade, with its reversible cutting edge, can be angled left or right up to 45 degrees, the ends can be tilted up or down by as much as 15 degrees, and the whole blade can be offset to the left or right by as much as 33". The blade can also be rotated 180 degrees for blading in reverse with the same angling, tilting and offset capabilities.
2WD 10': 225 HP, 12: 175 HP; 4WD 10': 200 HP, 12': 160 HP
Rear blades don't come any tougher than Land Pride's RBT60 Series 3-Way Rear Blade. They are built tough to handle leveling, finish grading and back filling applications involving roadwork, construction, landscaping, nurseries, drainage ditches, feedlot cleaning, farm use and snow removal. The 19" tall rolled moldboard with its grader blade can be hydraulically angled left or right up to 45 degrees, the ends can be tilted up or down by as much a 15 degrees and the whole blade can be offset to the left or right by as much as 55".
Land Pride's SBD35 Series 3-point Snow Blower is designed to fit tractors in the 85 to 180 HP range. One look at the aggressive dual augers, manufactured from 3/8" plate steel, and you'll know the SBD35 is built to withstand the rigors of snow and ice removal in tough conditions. Beyond the dual 16" augers, the SBD35 is manufactured with 1/4" side plates and utilizes four paddles on the augers to direct snow into the 34", 4-blade impeller. Skid shoes are available in rear-mount or side mount and are adjustable and replaceable.