2WD: 35-80 HP; 4WD: Up to 65 HP
The RBT3584 & RBT3596 Blades are an excellent choice for leveling, finish grading, and backfilling applications at large feedlots, outdoor arenas, construction sites, nurseries, and maintenance operations on farms, ranches, or homeowner lanes or roadways. They are excellent for snow removal in the pulling or the push-blade mode. Their hydraulic or manual angle, offset, and tilt capability make them ideal for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.
2WD: 65-100 HP; 4WD: Up to 75 HP
Land Pride's RBT4096 & RBT40108 3-Way Hydraulic Rear Blades are built tough from the ground up for applications ranging from landscaping, construction, snow removal, and feedlot cleaning. Designed to handle 100 HP tractors, this blade is also ideal for ditching, road grading and all-around farm use. By using hydraulics at all three positions, time can be utilized more efficiently by making changes on the go. Optional skid shoes and side plates are available for more precise results.
Land Pride's RBT4596 & RBT45108 3-Way Hydraulic Rear Blades are ideal for landscaping, construction, snow removal, feedlot cleaning, and all-around farm use. Make changes on the go with hydraulics at all three positions and use your time more efficiently. Available options include single or double hydraulic gauge wheels, side plates for holding dirt in, and skid shoes for blade protection.
Land Pride SB2584 Series Snow Blowers are available in 84" width and are 3-Point rear mounted. These Snow Blowers are primarily designed to remove snow from parking lots, walking paths, homeowner lanes, and driveway in residential or commercial applications. Optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units. With optional hydraulic or electric chute and deflector shield this unit is built for the long haul!
The Land Pride RB3772, RB3784 & RB3796 Rear Blades with 3-Way Positions (blade angle, blade tilt, and blade offset) are built tough from the ground up for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, or home owner lanes, and roadways. They are excellent for snow removal in pulling or push-blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and silage pit operations.