Snow Removal

RB05 Series Rear Blades

17-25 HP
Land Pride's RB05 Series Rear Blades are an excellent and economical choice for applications in leveling, finish grading, and backfilling at feedlots, building sites, nurseries, and maintenance operations on small farms and home sites. The RB05 is the perfect companion for your sub-compact tractor. (RB15 photo shown as reference.)
Read More

RB15 Series Rear Blades*

17-40 HP
Land Pride's RB15 Series Rear Blades are an excellent and economical choice for applications in leveling, finish grading, and backfilling at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, and home owner lanes and roadways. The multitude of forward and reverse working angles as well as moldboard offset capability allows the operator to work right up next to retaining walls, abutments and raised curbing. They are excellent for snow removal in the pulling or push blade mode.
Read More

RB16 Series Rear Blades*

20-40 HP
The Land Pride RB16 Series Rear Blades offer 3-way positioning (blade angle, blade tilt, and blade offset) and are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, or home owner lanes, and roadways. They are excellent for snow removal in pulling or push blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and for maintaining silage pit operations.
Read More

RB26 Series Rear Blades

RB26 Rear Blade
25-60 HP
The Land Pride RB26 Series Rear Blades offer 3-way positioning (blade angle, blade tilt, and blade offset) and are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations. They excel in snow removal in either the pulling or push blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and for maintaining silage pit operations.Optional hydraulic angling kits are available.
Read More

RBT35 Series Rear Blades

2WD: 35-80 HP; 4WD: Up to 65 HP
The RBT35 Series Blades are an excellent choice for leveling, finish grading, and backfilling applications at large feedlots, outdoor arenas, construction sites, nurseries, and maintenance operations on farms, ranches, or homeowner lanes or roadways. They are excellent for snow removal in the pulling or the push-blade mode. Their hydraulic or manual angle, offset, and tilt capability make them ideal for construction and maintenance of drainage ditches, waterways, and soil contours. They are also very effective in maintaining silage pit operations.
Read More

RBT40 Series Rear Blades

RBT40 Series Rear Blades
2WD: 65-100 HP; 4WD: Up to 75 HP
Land Pride's RBT40 Series 3-Way Hydraulic Rear Blades are built tough from the ground up for applications ranging from landscaping, construction, snow removal, and feedlot cleaning. Designed to handle 100 HP tractors, this blade is also ideal for ditching, road grading and all-around farm use. By using hydraulics at all three positions, time can be utilized more efficiently by making changes on the go. Optional skid shoes and side plates are available for more precise results.
Read More

RBT45 Series Rear Blades

70-125 HP
Land Pride's RBT45 Series 3-Way Hydraulic Rear Blades are ideal for landscaping, construction, snow removal, feedlot cleaning, and all-around farm use. Make changes on the go with hydraulics at all three positions and use your time more efficiently. Available options include single or double hydraulic gauge wheels, side plates for holding dirt in, and skid shoes for blade protection.
Read More

RBT55 Series Rear Blades

90-180 HP
Land Pride's RBT55 Series 3-Way Hydraulic Rear Blade are built tough from the ground up. Make manual or hydraulic adjustments; angle, tilt, or offset to meet the demands of heavy-duty jobs. The blade, with its reversible cutting edge, can be angled left or right up to 45 degrees, the ends can be tilted up or down by as much as 15 degrees, and the whole blade can be offset to the left or right by as much as 33". The blade can also be rotated 180 degrees for blading in reverse with the same angling, tilting and offset capabilities.
Read More

RBT60 Series Rear Blades

2WD 10': 225 HP, 12: 175 HP; 4WD 10': 200 HP, 12': 160 HP
Rear blades don't come any tougher than Land Pride's RBT60 Series 3-Way Rear Blade. They are built tough to handle leveling, finish grading and back filling applications involving roadwork, construction, landscaping, nurseries, drainage ditches, feedlot cleaning, farm use and snow removal. The 19" tall rolled moldboard with its grader blade can be hydraulically angled left or right up to 45 degrees, the ends can be tilted up or down by as much a 15 degrees and the whole blade can be offset to the left or right by as much as 55".
Read More

SB10 Series Snow Blowers

51: 18-32; 64: 18-59 HP
The SB10 Series Snow Blowers remove snow from driveways, parking lots, and sidewalks in general residential areas. The adjustable chute and deflector allow the operator to direct the snow where desired. With optional electric or hydraulic adjustments, the operator can stay on the tractor and rotate the chute as needed. The optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units.
Read More

SB15 Series Snow Blowers

30-59 HP
Land Pride's SB15 Series Snow Blowers are perfect for snow removal on parking lots, walking paths, homeowner lanes, and driveways on 30 to 59 HP tractors. Available in 74" widths, these units make quick work of your snow chores. With optional hydraulic or electric chute and deflector shield, optional front cutting edge, and optional skid shoes, this unit is built for the work at hand! The 16" auger and 24" impeller make short work of the biggest snow removal tasks.
Read More

SB25 Series Snow Blowers

43-103 HP
Land Pride SB25 Series Snow Blowers are available in 84" width and are 3-Point rear mounted. These Snow Blowers are primarily designed to remove snow from parking lots, walking paths, homeowner lanes, and driveway in residential or commercial applications. Optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units. With optional hydraulic or electric chute and deflector shield this unit is built for the long haul! The 84" width, 16" auger, and 24" impeller make short work of the largest snow removal tasks.
Read More

RB37 Series Rear Blades

35-80 HP
The Land Pride RB37 Series Rear Blades with 3-Way Positions (blade angle, blade tilt, and blade offset) are built tough from the ground up for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations on farms, ranches, or home owner lanes, and roadways. They are excellent for snow removal in pulling or push-blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and silage pit operations.
Read More

SBD35 Series Snow Blowers

85-180 HP
Land Pride's SBD35 Series 3-point Snow Blower is designed to fit tractors in the 85 to 180 HP range. One look at the aggressive dual augers, manufactured from 3/8" plate steel, and you'll know the SBD35 is built to withstand the rigors of snow and ice removal in tough conditions. Beyond the dual 16" augers, the SBD35 is manufactured with 1/4" side plates and utilizes four paddles on the augers to direct snow into the 34", 4-blade impeller. Skid shoes are available in rear-mount or side mount and are adjustable and replaceable.
Read More

SSP25 Snow Pushers - 10' & 12'

50-80 HP
Land Pride's SSP25 Snow Pushers are available in 2 popular sizes to fit your skid steer or tractor loader. The 25 Series offers a 3/16" thick, 36" high moldboard, 5/16" side panels, and are available in 10' and 12' widths. Both models come equipped with AR400 skid shoes that are adjustable, reversible, and replaceable. Land Pride Snow Pushers are designed to push snow straight ahead without leaving windrows or damaging the pavement below. The SSP mounts using the universal Quick-Attach plate and feature an 8" rubber wear edge.
Read More

STB15 Series Snow Trip Blades

30-70 HP
The STB15 Snow Trip Blades are designed to fit tractor loaders. The 15 Series features a 27" curved moldboard. Both models feature dual trip springs and abrasion resistant AR400 skid shoes. Hydraulic angling options are available on both units as well and both have safety orange edge markers as standard equipment.
Read More

STB10 Series Snow Trip Blades

25-40 HP
The STB10 Snow Trip Blades are designed to fit tractor loaders. The STB10 is available in 5' and 6' widths for tractors with loaders in the 25-40 HP range. The 10 Series Model has a 21" curved moldboard. (STB15 Photo shown for reference.)
Read More

SPL05 Series Loader Mount Snow Pushers

Up to 28 HP
The SPL Loader-Mount Snow Pushers are available in an 05 Series that fits BX Tractors only. The SPL05 Snow Pusher is available in a 48" and 60" model with a BX hitch. The unit is 18" high and 18" deep, features a 12 gauge moldboard, and 3/16" side panels.
Read More

SPL10 Series Loader Mount Snow Pushers

20-45 HP
The SPL10 Snow Pusher is available in 60", 72", and 84" with a 24" x 24" box, 10 gauge moldboard, and 1/4" sides. Both models come with optional steel or poly blade, optional pull back and replaceable skid shoes. The SPL10 skid shoes are manufactured from abrasion resistant AR400 steel.
Read More