The Land Pride PD35 Series Post Hole Digger is designed to meet the industrial duty applications of landscapers, construction companies, nurseries, ranchers, and farmers. The PD35 is designed for Category 1 or 2 three-point attachment and offers a 48" auger length and 9", 12", 15", 18" or 24" auger flights with cast steel fishtail tips. (PD25 Photo shown as reference.)
The SP2060 & SP2072 Soil Pulverizers loosen, pulverize, and level packed or encrusted soils in preparation for seeding or laying of new sod. The 60" or 72" working widths of the Land Pride SP20 Soil Pulverizers make them well suited for use by landscapers, rental yards, construction contractors, and professional turf managers. Applications include golf courses, housing developments, athletic fields, nurseries, sod farms, transportation right-of-ways, and park systems.
If heat, erosion or run-off is a problem, crimping straw into the ground needs to be the final step in grass seeding. The CR2572 Straw Crimper keeps seed in place and undisturbed soil on top, promoting an optimal growing environment where resources can be scarce. Seeding along highways, large municipal sites, and residential areas are ideal situations for the Land Pride Straw Crimper. Its 72" width means its sized right for most landscaping tractors and can be used for large or small landscaping jobs or roadside maintenance.
The Land Pride RB2672, RB2684 & RB2696 Rear Blades offer 3-way positioning (blade angle, blade tilt, and blade offset) and are an excellent choice for leveling, finish grading, and backfilling applications at feedlots, outdoor arenas, building sites, nurseries, and maintenance operations. They excel in snow removal in either the pulling or push blade mode. Their offset and tilt capability make them an excellent choice for construction and maintenance of drainage ditches, waterways, soil contours, and for maintaining silage pit operations.Optional hydraulic angling kits are available.
51: 18-32; 64: 18-59 HP
The SB1051 & SB1064 Snow Blowers remove snow from driveways, parking lots, and sidewalks in general residential areas. The adjustable chute and deflector allow the operator to direct the snow where desired. With optional electric or hydraulic adjustments, the operator can stay on the tractor and rotate the chute as needed. The optional front cutting edge and inner or outer depth shoes can be purchased with all models to increase the life of the units. (Not currently available in Canada)
Land Pride's FPS48 Food Plot Seeder is a highly versatile full component package designed to open and break up soil surfaces by discing the soil for seedbed or planting preparation. It will then spread the seeds while simultaneously pressing the seeds into full soil contact with a trailing fluted roller/packer. It can also be used to spread fertilizer, lime, gypsum and other soil conditioning amendments at distances ranging from 4 ft. to 20 ft. The spin spreader can also be used in the off-season to spread sand or salt for winter icing or slick snow conditions.
The RCR1242, RCR1248, RCR1260 & RCR1272 Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match
for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.
For small acreage owners looking for a heavier cutter, Land Pride offers the RCR1548. It features a 2" cutting capacity, a high blade tip speed, and larger gearbox than the RCR12. Ideal for maintenance of lanes, pastures, and other rough-cut areas.
The Land Pride HD25 Series Post Hole Diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They are available with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category 1 or 2 three-point hitch. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader.
The DT35 Ditcher features a standard 1" ripper shank, adjustable impeller head, and reversible/replaceable cutting edges. The 16" or 18" diameter impeller leaves a clean and sculptured trough to keep water flowing freely from unwanted areas. The DT35 quickly creates channels for small irrigation ditches and for efficiently diverting water from unwanted areas.