RC5615 Rotary Cutters

Available Models

RC5615, RCM5615

Description

The Land Pride RC5615 Rotary Cutter features a smooth top design, allowing debris and moisture to roll off or be easily swept or blown off. It's also smooth on bottom, which means less change of dry caking material getting lodged in tight corners.

The RC5615 features independent spring-cushioned wheel arms for more cushion going through rough terrain, which gives you an easier and more comfortable ride.Center skid shoes allow the cutter to 'glide' over bumps and undulations and protects the turf, as well as various components on the cutter. The spring cut chamber allows material to spring back up before being cut, giving a cleaner, more precise finish. Optional deck rings are available offering additional deck strength and help eliminate damage from obstructions.

Features and Benefits

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
Factory assembled	Saves customer set-up time and money.
7 Year limited gearbox warranty	Shows confidence in gearbox integrity.
250 HP Divider gearbox; 210 HP center & wing gearboxes	A rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox Seal Protection	Gearbox bottom seal protection for longer bearing life.
2 3/8" Output gearbox shaft	Large output shaft handles shock loads better.
Input driveline: Cat. 5 CV	Holds up to shock loads and harsh mowing conditions.
Easy Greasable drivelines	Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
2 or 4 Plate slip-clutch	Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
High blade tip speed	Allows clean cutting of material and even distribution.
6" Blade overlap	Eliminates skipping during turns.
High cutting capacity	Can cut brushy areas with saplings up to 4".
12" Deck height	Handles heavy cutting, which reduces balling-up of cut material under the deck.
Left wing rotates clockwise	Better discharge of material. Picks up tractor tracks.
3/16" Stump jumper backed with a 1" thick mounting bar	Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
10 gauge smooth deck top	Reduces accumulation of debris and is easier and faster to clean.
7 Gauge smooth deck bottom	Heavy deck design holds up to harsh conditions. No bottom obstructions.
Replaceable 1/4" side skirt	Reduces debris piercing possibilities. Can be replaced if damaged.
Self-leveling hitch	Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections	Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
1" Solid hinge rods	Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport lock pins	Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods	Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs	5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims	Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned trailing arms	Provides independent suspension, cushions loads on drawbar.
Replaceable wheel spindles	Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
Pre-cut chamber	Allows grass and vegetation to stand back up prior to cutting for a more complete cut.
Reinforced leading edge	Front of deck can withstand heavy brush and saplings.
Collapsible leveling rods	Prevents damage and failure to leveling rods.
1" Leveling rods	Large diameter leveling rods provide superior supporting strength over rough terrain.
Double swivel hitch option	Great for uneven terrain, reduces drawbar wear.
Bar-tite hitch option	Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Wheel options
Laminated tires	Eliminates flats.
Airplane tires without foam filling	Give better cushion while transporting.
Airplane tires with foam filling	Give better cushion while transporting and can’t go flat.
Deck rings (optional)	1/2" x 3" full welded deck ring keeps blades from damaging the deck.

 

Download Features and Benefits

Download features and benefits of this product here:  330-323f.pdf

Download Specifications

Download the Product Specifications here:  330-323s.pdf

Operator's Manual

Download a PDF of the Operator's Manual here:  330-323m.pdf

Parts Manual

Download the Parts Manual here:  330-323p.pdf

Download Accessory Manuals

The following accessory manuals are available for download:

Warranty

Overall Unit and Driveline: One year Parts and Labor
Gearbox: 5 years on Parts and Labor; 6th & 7th Year Parts Only
Hydraulic Cylinders: One year Parts and Labor; Hoses and seals are considered wear items.
Blades, tires and driveline friction discs: Considered wear items

See complete Warranty Statement below.

Download Complete Warranty

Download the full Product Warranty here:  330-323w.pdf

Product Literature

Download product literature here:  lit_rc5615.pdf