RC3615 Rotary Cutters

Available Models

RC3615, RCM3615

Description

The Land Pride RC3615 and RCM3615 Series Rotary Cutters is ideal for maintaining grazing areas for horses or mowing the wide open spaces close to town. The 15' cutting width and ability to cut weeds and brush up to 2.5" in diameter make them well suited for these applications. The 36 Series offers a pull-type self leveling tongue with a clevis hitch for attachment to 50-160 hp tractors, and features a Cat. 5 main driveline. Safety guards around the cutter are offered in either chain or rubber.

Features and Benefits

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures.
Factory assembled	Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
160 HP Divider gearbox and 110 HP wing gearboxes	A rugged heavy built gearboxs capable of handling heavy cutting applications.
Gearbox seal protection	Gearbox bottom seal protection for longer bearing life.
Smooth Top Design	Allows for easy cleaning of deck.
Low tongue weight	Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Narrow tongue construction	Allows for a tighter turning radius.
Input Driveline: Cat. 5 CV	Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
Wing driveline: Cat. 4 with slip-clutch	Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load instead of twisting the driveline. (Optional Cat. 5 driveline is available.)
Slip-clutch drivelines	Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
High Blade tip speed	Allows clean cutting of material.
6" Blade overlap	Eliminates skipping during turns.
Left wing rotates clockwise	Better discharge of material. Picks up tractor tracks.
3/16" Round stump jumper	Standard thick stump jumper material keeps damage to a minimum.
1/4" Sidewall thickness	Increased thickness reduces damage from objects being thrown into deck sidewalls.
Self-leveling hitch	Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections	Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
1" Solid hinge rods	Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport locks	Wing transport locks securely hold the wings in the folded position in case of hydraulic failure.
Enclosed front to rear dual leveling rods	Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.
5-Bolt hubs	5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Spring cushioned center-axle	Protects unit from bumps and ground shock.
Replaceable wheel spindles	Wheel spindles can be replaced when damaged without replacing entire axle assembly.
Wheel options:
Laminated tires	Eliminates flats.
Airplane tires without foam filling	Give better cushion while transporting.
Airplane tires with foam filling	Give better cushion while transporting and can’t go flat.
Double swivel hitch option	Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option	Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

Download Features and Benefits

Download features and benefits of this product here:  330-502f.pdf

Download Specifications

Download the Product Specifications here:  330-502s.pdf

Operator's Manual

Download a PDF of the Operator's Manual here:  330-502m.pdf

Parts Manual

Download the Parts Manual here:  330-502p.pdf

Download Accessory Manuals

The following accessory manuals are available for download:

Warranty

Overall Unit and Drivelines: One year Parts and Labor
Gearbox: Five years Parts and Labor. One year on seals and bearings.
Hydraulic Cylinder: One year Parts and Labor
Hoses and seals: Considered wear items
Blades, Tires, and Driveline Friction Discs: Considered wear items.

See complete Warranty Statement below.

Download Complete Warranty

Download the full Product Warranty here:  330-502w.pdf

Product Literature

Download product literature here:  lit_rc3615.pdf