RCR35 Series Rotary Cutters

Available Models

RCR3596, RCRM3596, RCR3510, RCRM3510

Description

The medium-duty Land Pride RCR35 Series Rotary Cutter provides excellent cutting performance on gently sloping or slightly contoured rights-of way, pastures, set-aside acres, or row crop fields. Their 8' or 10' cutting width, 2" to 12" cutting height and ability to cut weeds and brush up to 2" in diameter make them well suited for a variety of applications. Both models offer Quick-Hitch adaptability with either 540 RPM or 1000 RPM PTO capability.

The RCR3596 Cutter Series is designed for category 1 or 2, three point, semimount, or pull-type attachment. Three-point attachment for the RCR3596 requires a 50-120 HP tractor, while the semi-mount or pull-type requires a 30-120 HP tractor. The RCR3510 Series is designed for category 2 or 3 three point, semi-mount, or pull type attachment with the lift type requiring 60-120 HP input and the pull-type or semi-mount requiring 50-120 HP input. Heavy-duty stump jumpers, main driveline clutches, and outboard flex couplers are offered for driveline and gearbox protection. Safety guards around the cutter are offered in either chain or rubber.

Features and Benefits

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
540 or 1000 RPM	Fits wider variety of tractors.
Gearbox HP rating	120 HP on center unit and 100 HP on outboard units.
5 Yr. limited gearbox warranty	Shows our confidence in the gearbox integrity.
3 Gearboxes	Allows equal torque to be spread to left and right gearbox.
Splined rubber flex-couplers between the center and outboard gearboxes	Protects the driveline and gearboxes from hard objects in the blade path.
Pull-type unit Constant velocity driveline U-Joint option (RCR3510 only)	Reduces chatter and extends life of U-joint during turns.
Slip-clutch protection on main driveline	Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
8’- Cat. 1 & 2 or 10’- Cat. 2 & 3 -Point & Semi-mount Hitches r Pull-type Hitch	its a wide range of tractors. emi-mount and Pull-type fit older tractors without a top link and smaller tractors without nough lift capacity.
10 Gauge deck, fully welded	Fully welded deck adds rigidity.
1/4” Thick sidewalls	Protects sidewalls from thrown objects.
Obstacle free underside	Underside of deck is free of reinforcement members which tend to allow material to lodge.
Round back design	Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
Pull-type w/dual leveling rods	Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber guard option	Reduces flying debris.
Full length skids with replaceable shoes	Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
Splined blade hub	Splined blade hub offers tight non-slipping attachment to output shaft.
3/16” Round stump jumper	Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1” x 4” Blade bar	Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
1/2” x 4” Heat-treated blades	Heat-treated blades last longer than non-heat-treated blades.
2” Diameter cutting capacity	Aids in cutting brush.
High blade tip speed	Means cleaner cutting. 96” at 540 rpm - 14,223 fpm; at 1000 rpm - 14,442 fpm 10’ at 540 rpm - 17,291 fpm; at 1000 rpm - 17,569 fpm
Laminated tires on 3-Point and Semi-Mount	Laminated tires can handle almost any condition.
Airplane tires or Laminated tires on Pull-Type	Airplane tires offer smooth roadability. Laminated tires don’t go flat.
Quick-Hitch adaptable	3-point and semi-mount are Quick-hitch adaptable.

 

Download Features and Benefits

Download features and benefits of this product here:  312-517f.pdf

Download Specifications

Download the Product Specifications here:  312-517s.pdf

Operator's Manual

Download a PDF of the Operator's Manual here:  312-517m.pdf

Parts Manual

Download the Parts Manual here:  312-517p.pdf

Download Accessory Manuals

The following accessory manuals are available for download:

Warranty

Overall Unit and Drivelines: One year Parts and Labor
Gearbox:
(S/N 375614+) Five years on Parts and Labor.
(S/N 375613-) One year on Parts and Labor.
Hydraulic Cylinder: One year Parts and Labor
Hoses and seals: Considered wear items
Blades, Tires, and Driveline Friction Discs: Considered wear items.

See complete Warranty Statement below.

Download Complete Warranty

Download the full Product Warranty here:  312-517w.pdf

Product Literature

Download product literature here:  lit_rcr35.pdf