RCD1884 Rotary Cutters

Available Models

RCD1884

Description

Land Pride's RCD1884 Dual Spindle Offset Rotary Cutter with its 84" cutting width, 10" offset to the right and 360 degree rotating tailwheels is ideal for clearing grass, weeds, and light brush up to 1 1/2" in diameter from areas in orchards and tree groves, under over-hanging hedge rows, or next to fence lines and guard railings. It is also well suited for operation on gentle slopes and mildly contoured approaches immediately adjacent to ponds, lakes, streams, drainage ditches, and roadways. The 2" to 12" cutting height makes it well suited for mowing pastures, set aside acres, and row crop fields.

The RCD1884 is compatible with 35 to 60 horsepower tractors and operates at 540 rpm PTO speed with a medium duty ASAE Category 3 driveline and a 2 plate slip-clutch for gearbox and driveline protection. The category I 3-point hitch is Quick Hitch adaptable. The standard stump jumper under each blade spindle slides over stumps, rocks and debris. A standard rubber front safety guard and rear metal band provide protection against thrown objects.

Features and Benefits

FEATURES	BENEFITS
Surpassed rugged industry standards	All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
5 Year gearbox warranty	Shows our confidence in the gearbox integrity.
Gearbox Seal Protection	Gearbox bottom seal protection for longer bearing life.
Cat. 3 main driveline with 2-plate slip-clutch	2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient than shear bolt for continual work.
Shock absorbing flex-coupler between main and side gearboxes	Protects intermediate drive shaft and side gearbox from hard objects in the blade path.
10” Deck offset to the right	Allows the operator to cut closer to bodies of water, drainage ditches, roadways and objects such as fence lines, guard rails, buildings and trees.
Lower clevis type 3-point hitch	Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
Fully welded 10 gauge deck	Fully welded deck adds additional strength to the deck. 10 Gauge decks can withstand more abuse than decks with lighter gauge.
Box tubing deck supports	Makes for a stronger rigid deck.
Round back design	Helps discharge grass better than enclosed or partially enclosed cutters.
11 5/8” Deck Height	Allows cutter to handle heavy cutting conditions.
1 1/2” to 12” Cutting height	Provides for a wide range of cutting conditions.
Skid shoes	Provides sidewall reinforcement and protection to bottom of sidewall.
1/2” x 4” Heat-treated free swinging blades	Free swinging protects from obstructions. Heat-treated offers longer life.
1/2/” x 4” Blade bar	Heavy-duty blade bar adds support to stump jumper and gearbox output shaft.
Splined blade bar hub	Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
Stump jumper	Standard round stump jumper slides over stumps, rocks and debris.
Rubber front guarding Metal band rear guarding	Protect against flying debris.
Optional 15” Laminated tailwheel 4” x 16’ Molded rubber	Laminated material is long lasting in rough conditions and can’t go flat. Can’t go flat.

 

Download Features and Benefits

Download features and benefits of this product here:  326-355f.pdf

Download Specifications

Download the Product Specifications here:  326-355s.pdf

Operator's Manual

Download a PDF of the Operator's Manual here:  326-355m.pdf

Parts Manual

Download the Parts Manual here:  326-355p.pdf

Download Accessory Manuals

The following accessory manuals are available for download:

Warranty

Overall Unit and Driveline: One year Parts and Labor
Gearbox: 5 years Parts and Labor
Blades, tires and driveline friction discs: Considered wear items

See complete Warranty Statement below.

Download Complete Warranty

Download the full Product Warranty here:  326-355w.pdf

Product Literature

Download product literature here:  lit_rcd18.pdf